898B Non-phosphorus Degreasing Agent For Alumium and Alumium Alloy
SPECIFIC PROPERTIES & APPLICATION
1, Used for immersion, ultrasonic and spray cleaning process;
2, No phosphorus degreasing agent, in line with environmental requirements, without corrosion or weak corrosion on basic material;
3, Can be quickly degreased at room temperature, simple operation, high efficiency;
4, Suitable for aluminum and aluminum alloy chemical degreasing.
|Aluminum and aluminum alloy chemical degreasing, mechanical parts cleaning degreasing|
According to the degreasing tank size, add the calculated amount of 898B → Add water 1/3 - 2/3 of tank volume in degreasing tank, stir evenly to completely dissolve →add water up to required volume, stir
BATH MAINTENANCE & MANAGEMENT
1, In the production, with the degreasing process continued, will consume the effective components in the degreasing tank, in order to maintain degreasing performance, need to add degreasing agent. Degreasing agent general consumption of 200-300m2 / Kg, the consumption will be different according to the degree of oil pollution on work parts.
2, The prepared bath pH is between 10-12, under 20℃, the test specific gravity of bath is between 1.030-
1.036, for each additional 5g / L degreasing agent, the specific gravity of the tank increased 0.003. Degreasing agent 898B can also be added according to the pH value of the bath, while bath pH is below 9, please add the degreasing agent.
3, Clear the oil contamination on the degreasing bath surface in time to maintain the cleanness of bath.
When bath is greatly polluted, it is recommended to prepare new bath.
4, .The product is solid non-poisonous, incombustible and non-explosive.