1. Specific Properties and Application
FF-PD108 palladium-cobalt alloy process can produce bright, ductile and white coatings (approximately 80-90% palladium, 10-20% cobalt) in a slightly alkaline bath, which is suitable for rack plating and barrel plating operations. The coating is snow-white, rich in gloss, and has a low-porosity coating to improve the protective coating and prevent the corrosion of the substrate metal coating.
Coating characteristics: the coating is snow-white and shiny, corrosion-resistant
Metal content: 80-90% palladium, 10-20% cobalt
2. Technical Formulation
|Mixing mode||Mechanical stirring and bath circulation|
|Palladium metal deposition rate||At 1A/dm2, 1um can be plated in 4.5 minutes, and 0.025g palladium-cobalt alloy can be plated per ampere minute.|