FF-J20/J40/J65 Wetting De Foaming And Dispersion Properties

FF-J65 ; Wetting, de-foaming, and dispersion properties

DESCRIPTION and KEYPERFORMANCE PROPERTIES / Overview
The FF-J65 surfactant product is a versatile aid with wetting, de-foaming, and dispersion properties.This series of surfactants are the addition of ethylene oxide and FF104 surfactant, adding ethylene oxide to FF104 surfactant can improve the hydrophilic of the product, increase its solubility in water, improve wetting and de-foaming properties.Compared to the FF104 series of products, with different water-soluble, expanding the use.And to compound the FDA standards.The FF-J65 has higher turbidity points and can be used in It is also transparent in higher temperature systems.

PRECAUTIONS FOR USE
All FF-J series products should be thoroughly mixed evenly before use and then added to the formula system.FF-J65, FF-J85 showed a solubility greater than 1% in water, while the addition of FF-J20, FF-J40 to the formulation required dispersed mixing for 15 —— for 30 min.

APPLICATION GUIDELINES / Application Information
Water-borne coating, water-borne pressure-sensitive glue, run plate liquid, inkjet ink Features and advantages:
The aid can quickly and effectively reduce the system surface tension, wetting the substrate, and spread out on the substrate surface can moisten the metal, plastic .The surface, even with dust and oil, can good wetting substrate; does not stabilize foam and help eliminate foam; improve uniform coating without fish eye or small needle eye, and improve smoothness.

Additives&Instruments
GUIDELINES / Application Areas
water paint●
Water pressure sensitive glue Run version of liquid●
Spray ink●
latex impregnated●
electroplate liquid●
——● specially recommended; —— recommended
recommendedThe aid is also recommended for the production of a stable univer sal pigment concentrated slurry.

USE / Recommended Amount
Amount of aid dosage (purchased form):
Water-based coating: 0.1% - -3.0%
Water-borne pressure-sensitive glue: 0.1% - -1.0%
Run liquid: 0.1% -1.0%
Ink-jet ink: 0.1% - -1.0%
The above data are an empirical amount, and the best amount needs to be determined through a series of trials.

PACKING / Packaging
--25kginner coated iron bucket
--A 180kg ring plastic bucket