FF-C04 ; Wetting, de-foaming, and dispersion properties, addition of ethylene oxide and alkyndotaradiol surfactant
DESCRIPTION and KEYPERFORMANCE PROPERTIES / Overview
The FF-C04 surfactant product is a versatile aid with wetting, de-foaming, and dispersion properties.This series of surfactants are the addition of ethylene oxide and alkyndotaradiol surfactant, adding ethylene oxide to alkyndotaradiol surfactant, can improve the hydrophilic of the product, increase its solubility in water, improve wetting and de-foaming properties.This series of different bonus products, with different water solubility, expand the use.And to compound the FDA standards.
PRODUCT DATE SHEET / Product Information
Typical materialized data:
The data presented on this data page is only typical values, not a technical indicator of the product.
Tidity point: 5% 25% ethylene glycol monobutyl ether solution Use note
All FF-C series products should be thoroughly mixed evenly before use and then added to the formula system.FF The solubility of the FF-C07 was greater than 1% in water, while the addition of the FF-C04 to the formulation required dispersed mixing for 15 —— for 30 min.
APPLICATION GUIDELINES / Application Information
Characteristics and advantages of water-based coating, water-based pressure-sensitive glue, run liquid, ink-jet ink:
The aid can quickly and effectively reduce the system surface tension, wetting the substrate, and spread on the substrate surface can moisten the metal, plastic
The surface, even with dust and oil, can good wetting substrate; does not stabilize foam and help eliminate foam; improve uniform coating without fish eye or small needle eye, and improve smoothness.
GUIDELINES / Application Areas
water paint ●
Water pressure sensitive glue ●
Run version of liquid ●
Spray ink ●
latex impregnated ●
electroplate liquid ●
●—— specially recommended; ○—— recommended
The aid is also recommended for the production of a stable universal pigment concentrated slurry.
USE / Recommended Amount
Amount of additives (purchased form): water-borne coating: 0.1% - -3.0%
Water-borne pressure-sensitive glue: 0.1% - -1.0%
Run liquid: 0.1% -1.0%
Ink-jet ink: 0.1% - -1.0%
The above data are an empirical amount, and the best amount needs to be determined through a series of trials.
PACKING / Packaging
- A 180kg ring plastic bucket