TL-J Series Defoaming And Wetting Agent Yellowish Liquid

This series of surfactants is the addition of ethylene oxide and TLl-104 surtactants.By adding ethylene oxide to Tl-104 surfactants,thehydrophilicity and solubility are enhanced, thus improving wetting and defoaming performances.Compared with Tl-104 series,ithas different water solubility, so the usage range is expanded.t also complies with FDA standard.The cloud point of TL-J55 is highand it is still transparent when used in higher temperature system.

TL-J20/40 surfactant can wet metal and plastic surfaces, even if the surface is dusty and oily it can wet the substrate well,and it willnot stabilize the foam and help to defoam.Water-based pressure sensitive adhesive Tl-J40,TL-J65 surfactant has wetting anddefoaming properties,helps to improve leveling property and can improve the coating properties of low surface energy substratessuch as silane release paper or plastic film with low foaming.lt is unnecessary to add a strong silicon-containing defoaming agent soit can reduce surface defects such as shrinkage cavities.

TL-J40,TL-J65 surfactant is applied in fountain solution, it does not cause foam, can quickly wet PS plate, especially suitable forhigh-speed printing machine, the printing dot is clear and will not cause excessive emulsification of ink, will not cause printing platethe capsules swell. adding TL-J40,TL-J65 surfactant can reduce alcohol consumption or avoid using alcohol at the back end

The properties of the ethynyl group in the TL-J65,surfactant make it stable in a strong acid environment, so it can be used as abrightener and a wetting agent in electroplating and pickling solutions. low foaming and not stablizing foam, high cloud point canimprove the smoothness and brightness of the surface of the plated parts, and prevent the dents and pinholes of the plated parts.TL-J65 can be applied to copper plating.,nickel plating, galvanizing,.silver plating,gold plating process.

TL-J65 has excellent performance in thermal foaming or piezoelectric jet ink.Low foaming can significantly improve print fluencyand print bar clarity

In the latex impregnation production,TL.J series surfactant are used in the formulation to defoam,reduce surface tension, increasethe wetting ability, improve uniform coating, and greatly reduce the rejection rate of latex gloves and other latex products.

All Tl-J series products should be thoroughly stirred and mixed before use.TL-J65.TL-J85 solubility in water is greater than 1%,while TL-J20,TL-J40 added to the formulation requires dispersion mixing for 15-30 minutes