Wuhan Fengfan International Trade Co.,Ltd. 86-27-85615818 info@fengfan.net
General Purpose Synthetic Water Soluble Cutting Fluid Metal Cutting Fluid QX-200

General Purpose Synthetic Water Soluble Cutting Fluid Metal Cutting Fluid QX-200

  • High Light

    Synthetic Water Soluble Cutting Fluid

    ,

    General Purpose Water Soluble Cutting Fluid

    ,

    Water Soluble Metal Cutting Fluid

  • Properties
    Water Soluble Cutting Fluid
  • Appearance
    Light Yellow To Yellow Transparent Liquid
  • Characteristic
    Environment-friendly Water-soluble Cutting Fluid
  • PH
    7-9
  • Place of Origin
    CHINA
  • Brand Name
    FENGFAN
  • Model Number
    QX-200

General Purpose Synthetic Water Soluble Cutting Fluid Metal Cutting Fluid QX-200

General purpose fully synthetic water-soluble cutting fluid ; Metal cutting fluid QX-200

 

 

1. PRODUCT FEATURES

 

Environment-friendly water-soluble cutting fluid with low COD makes it easier for the back-end wastewater treatment and greatly reduces the cost of wastewater treatment;

 

The cost is lower than that of oil-based cutting fluid, and it will not be affected by international oil price and cause significant price fluctuation;

 

The operation is very simple, which is more conducive to the cleaning of the equipment. The pH value of the formula is neutral and mild, which is more conducive to protecting the skin for workers during operation:

1. Lubrication; 2. Cooling effect; 3. Cleaning effect; 4.Rust prevention.

 

Item Specification
Appearance Light yellow to yellow transparent liquid
Specific gravity (25 ℃ / g / cm3) 1.01±0.05
PH (1% aqueous solution) 7-9
COD of stock solution (ppm) 40,000-70,000
COD of 0.05% aqueous solution (ppm) <400
Conductivity (room temperature, 1% aqueous solution, um / cm) 0-8
Surface tension (0.3% aqueous solution N / M) <32

 

2. PRODUCT INSTRUCTIONS

 

1) Clean the liquid bath or bucket before use.

2) The addition ratio of cutting fluid to water is 1:15-1:20.

3) In order to ensure the gloss and antirust effect of the machined parts and the protection of the lathe bit, it is recommended to replace it every seven working days.

 

 

3. PACKING

 

1) 25kg plastic barrel;

2) Store in a ventilated, cool and dry place with a storage temperature of 5-40 ℃;

3) The shelf life is one year under normal temperature.

 

 

4. ATTENTION

 

1) Prevent the mixing of water and miscellaneous oil during storage, otherwise the product may deteriorate;

2) If the color of the liquid becomes darker during storage or use, the use effect will not be affected;

3) It is not edible. If it enters your eyes accidentally, please wash it with clean water immediately. If necessary, please see a doctor immediately.