General purpose fully synthetic water-soluble cutting fluid ; Metal cutting fluid QX-200 ; Rust inhibition
1. PRODUCT FEATURES
Environment-friendly water-soluble cutting fluid with low COD makes it easier for the back-end wastewater treatment and greatly reduces the cost of wastewater treatment;
The cost is lower than that of oil-based cutting fluid, and it will not be affected by international oil price and cause significant price fluctuation;
The operation is very simple, which is more conducive to the cleaning of the equipment. The pH value of the formula is neutral and mild, which is more conducive to protecting the skin for workers during operation:
1. Lubrication; 2. Cooling effect; 3. Cleaning effect; 4.Rust prevention.
|Appearance||Light yellow to yellow transparent liquid|
|Specific gravity (25 ℃ / g / cm3)||1.01±0.05|
|PH (1% aqueous solution)||7-9|
|COD of stock solution (ppm)||40,000-70,000|
|COD of 0.05% aqueous solution (ppm)||<400|
|Conductivity (room temperature, 1% aqueous solution, um / cm)||0-8|
|Surface tension (0.3% aqueous solution N / M)||<32|
2. PRODUCT INSTRUCTIONS
1) Clean the liquid bath or bucket before use.
2) The addition ratio of cutting fluid to water is 1:15-1:20.
3) In order to ensure the gloss and antirust effect of the machined parts and the protection of the lathe bit, it is recommended to replace it every seven working days.
1) 25kg plastic barrel;
2) Store in a ventilated, cool and dry place with a storage temperature of 5-40 ℃;
3) The shelf life is one year under normal temperature.